Skip Main Navigation
Page Content

Save This Event

Event Saved

Casing Design: Istanbul


Monday, 17 September 2018 at 09:00 - Friday, 21 September 2018 at 17:00 (Eastern European Standard Time Turkey Time)

Casing Design: Istanbul

Ticket Information

Ticket Type Sales End Price Fee Quantity
Standard admission 16 Sep 2018 £2,950.00 £0.00

Share Casing Design: Istanbul

Event Details

Course overview

This fundamentals casing design course is delivered as a scenario based training course using real well data. The course takes the candidates through all the aspects of casing design from first principles. A working spreadsheet is created by each student for casing design that can be used by the students in their day to day jobs

The course is designed for

This course is intended for drilling and completion engineers that are required to understand or conduct casing design.

Course objectives and outcomes

The objectives of this course are to provide students with a starting competency in casing design. The course addresses the engineering and operational aspects of casing design. A full casing design project from an actual well is used during the course. Students are taken through the API casing design calculations. Load cases, couplings, thermal loading, material selection and well control aspects of casing design. A large part of the course involves hands on exercises and students should have a calculator and a laptop computer with a spreadsheet program during the course. The course finishes with the operational aspects of running and cementing casing and introduces drilling with casing operations.

The outcomes of the course are that participants will understand;

  • Casing strengths such as yield, burst and collapse
  • All the load cases and associated design factors
  • Triaxial and combined loads
  • Material selection with regards to sour gasses and partial pressures
  • Thermal loading, annular pressure build-up and corrosion effects
  • Buckling and wear
  • Conductor casing design for land, surface BOP’s and subsea BOP’s
  • Drilling with casing 

Course outline

Day 1: Introduction
The first day introduces the students to manufacturing process of casing and the API specifications of casing. The properties of steel are presented. This if followed by the introduction of casing design standards before moving on the calculations of tensile strength, burst, yield and collapse and axial loads of pipes.

  • Welcome and Introductions
  • Manufacturing of casing
  • API specifications of Casing
  • Properties of steel tubulars
  • Casing Design Standards
  • Tensile Strength, Burst, Yield, Collapse, Axial Loads
  • Day 1 Exercises; Load calculations for tensile strength, burst collapse and yield

Day 2: Pressures and Temperatures
The second day of the course starts with pressures and temperatures. Students are shown the origins of pore and fracture pressures and hydrostatic pressures. Buoyancy calculations are done before moving to the design of the surface casing in the example well. With the surface casing designed, the couplings and connectors are presented.

  • Hydrostatic Pressures
  • Pore and Fracture Pressures
  • Temperatures
  • Buoyancy
  • Well Trajectories
  • Casing Design Requirements
  • Load Cases and Design factors
  • Design of surface casing
  • Couplings and Connectors
  • Day 2 Exercises: Hydrostatic pressures, pore and fracture pressures, buoyancy, design of surface casing.


Day 3: Kick Tolerance and Material Selection
Day 3 of the course starts with the design of a drilling liner. This is followed by gas pressures, leak off tests and kick tolerance. The design of the intermediate casing is then completed. Partial pressures, salt loading and material selection then completes the day.

  • Gas Pressures
  • Kick Tolerance and Leak off tests
  • Design of Drilling Liner
  • Design of Intermediate casing
  • Partial pressures and salt loading
  • Material Selection
  • Combined Loads and Triaxial Design
  • Day 3 Exercises; Drilling Liner Design, Kick Tolerance, Partial Pressures, Intermediate Casing Design, Material Selection, Combined Loads, Triaxial design.

Day 4: Annular Pressures, Buckling and Conductor Design

The fourth day of the course starts with the design of the production casing. From there the course addresses annular pressure build-up, casing wear and corrosion of casing. Pipe buckling is covered before addressing conductor design. Conductor design is covered for land, offshore and deepwater operations.

  • Production Casing Design
  • Annular Pressure build-up
  • Casing Wear
  • Casing Corrosion
  • Buckling
  • Conductor Design Land
  • Conductor Design offshore surface BOP
  • Conductor Design offshore subsea BOP
  • Day 4 Exercises; Production Casing Design, Casing wear, Bucking, Conductor Design.


 Day 5: Running Casing, Drilling with Casing

The last day of the course starts with the design of the production liner and the aspects of tubing leaks. With the casing design completed we address the issues of blowouts and the considerations on casing design. The operational aspects of running and cementing casing are presented. Drilling with casing is introduced before we wrap up the course.

  • Production Liner Design
  • Blowout Considerations
  • Running and Cementing Casing
  • Expandable Casing
  • Drilling with Casing
  • Day 5 Exercises; Production liner Design, Blowout Considerations and Drilling with casing.

"Excellent instructor – very wide-ranging experience." - NCOC, Kazakhstan

Do you have questions about Casing Design: Istanbul? Contact Esanda

Save This Event

Event Saved

When & Where

Kalyon Hotel
Sultan Ahmet Mahallesi
Kennedy Cd. No:34
Fatih/Istanbul, 34122

Monday, 17 September 2018 at 09:00 - Friday, 21 September 2018 at 17:00 (Eastern European Standard Time Turkey Time)

  Add to my calendar



Esanda is a specialist training provider serving the global upstream oil and gas industry. Our course leaders are practicing industry specialists who develop our in house courses and work with clients to build bespoke training for their staff.  Our operations are supported by our UK and Australia offices.

We pride ourselves on being able to bring hundreds of man years of experience to the training sector and the positive feedback we receive from our satisfied clients.

Our courses have evolved over 20 years with a focus on Field Development Planning, which includes a strong emphasis on costing and economic analysis as well as concept selection for our clients. The range of clients includes those involved in Onshore, Offshore, Subsea, GTL, LNG and unconventional developments. This work and client training has allowed us to build strong expertise with practical and up to date knowledge of the subject areas.

For details of our course terms and conditions, click here.

  Contact the Organiser

Please log in or sign up

In order to purchase these tickets in installments, you'll need an Eventbrite account. Log in or sign up for a free account to continue.