£418.80

IPS e.max CAD Abutment Solutions - Module 3

Event Information

Share this event

Date and Time

Location

Location

ICDE, Leicester

Compass Building

Feldspar Close

Leicester

LE194SD

United Kingdom

View Map

Event description

Description

Course covers the completion of CAD / CAM fabricated implant-supported hybrid restorations

IPS e.max CAD Abutment Solutions are CAD / CAM-manufactured, implant-supported hybrid restorations for single teeth. These are individually manufactured from lithium disilicate blocks (LS2) IPS e.max CAD and bonded to a titanium base.


Course content:
This course does not include practical CAD design exercises (theory), but is aimed at CEREC Clinicians performing the technical dental workflow for the completion of hybrid abutments
including the proper bonding with the Ti-base as well as the customization and completion of hybrid abutment crowns.

Topics Covered
• IPS. e.max CAD crown (tooth 21) on LS2 hybrid abutment and a LS2 Hybrid Abutment (Tooth), prefabricated from an IPS e.max CAD block (Tooth 21) is crystallized and completed. Then the correct steps for the permanent bonding of Ti-Base and LS2-Hybrid-Abutment demonstrated with the luting composite Multilink Hybrid Abutment and performed by each participant. After that, a prefabricated IPS e.max CAD crown (tooth 21), suitable for the created LS2 hybrid abutment which is characterised and finished.

• IPS. e.max CAD Hybrid Abutment Crown (Tooth 15) a second restoration , a prefabricated monolithic hybrid abutment crown (tooth 15) by crystallization and further characterisation to individualise the restoration which is then finished and bonded to the Ti-Base target price

The participants learn the technical steps of customizing and completing an IPS e.max CAD crown (Tooth 21) on an LS2 hybrid abutment, as well as the customization and completion of an IPS e.max CAD hybrid abutment Crown (tooth 15) including correct and permanent bonding of the Ti-base with the luting composite Multilink Hybrid abutment. We are working on exclusive IPS e.max models dealing with the created IPS e.max CAD restorations ideal for patient information use in the dental office.

Target group:

Dentists, with CEREC, who need to cover all the manual steps of customization and completion including permanent bonding of IPS e.max CAD Hybrid abutments and hybrid abutment crowns.








Share with friends

Date and Time

Location

ICDE, Leicester

Compass Building

Feldspar Close

Leicester

LE194SD

United Kingdom

View Map

Save This Event

Event Saved